Services

/Services
Services2020-07-02T11:10:08+00:00
2906, 2020

Ultrasonic Testing (UT)

Ultrasonic Testing is carried out for detecting internal flows in fabrication materials, Steel components, Boilers, Pressure Vessels, Castings, Forgings & Rolled Products etc. Ultrasonic Examination uses high-frequency sound waves which are transmitted into a material to detect discontinuities or locate changes in material characteristics. Sound is introduced into the object being examined and reflections from internal imperfections, areas of acoustic impedance, or varying geometrical surfaces are returned to a receiver.

2906, 2020

Magnetic Particle Testing (MT)

Magnetic Particle Inspection (MPI) is a Method for detecting surface and sub surface discontinuities in ferromagnetic materials such as iron,nickle,cobalt and some of their alloys.This method is working on the base of passing the magnetic field into the testing parts. Magnetic Particle Examination is accomplished by inducing a magnetic field into a ferromagnetic material and applying iron particles to the surface of the item being examined. Surface and near-surface discontinuities affect the flow of the magnetic field within the part causing the applied particles to gather at locations of flux leakage, thus producing a visible indication of the irregularity on the surface of the material.

2906, 2020

Penetrant Testing (PT)

Dye Penetrant Inspection ( DPT) is w widely applied inspection method used to open to the surface discontinued ( Defects ) Penetrant Examination is performed with a dye solution. Once applied to the surface, the dye will effectively penetrate any surface-breaking cavity. Excess solution is removed from the object. A developer is then applied to draw out any penetrant that remains unseen. With fluorescent dyes, ultraviolet light is used to make the “bleed-out” fluoresce brightly, allowing imperfections to be readily seen. With visible dyes, a color contrast between the penetrant and developer makes the “bleed-out” easy to see.

107, 2020

Radiography Testing (RT)

Radiographic Testing (RT) is a nondestructive examination (NDE) technique that involves the use of either x-rays or gamma rays to view the internal structure of a component. In the petrochemical industry, RT is often used to inspect machinery, such as pressure vessels and valves, to detect for flaws. RT is also used to inspect weld repairs.

107, 2020

Visual and Optical Testing (VT)

Visual Examination can be an effective way to recognize surface imperfections that could adversely affect a part or component. Visual Examiners use knowledge of how a part is manufactured, the function of the human eye, lighting requirements, and precise measuring tools to evaluate materials. Computer controlled camera systems and optical aids such as boroscopes may also be used to recognize and measure features of a component.

107, 2020

Hardness testing

Hardness Testing is carried out for detecting Surface Hardness in the various types of material. Hardness measurement is done with the different Scales Like BHN,HRB,HRC,Shore etc.

107, 2020

Third Party Inspections(TPI)

We are also Provides the Services for the THIRD PARTY INSPECTIO(TPI) in the various industrial Segments like Petrochemical Plant, Higher Equipment Fertilizer Inspection, Oil and Gas Plant, Pipeline, Showdown Job, Scrap Project.

107, 2020

Ultrasonic Thickness Measurement

Ultrasonic Thickness Measurements is carried out for measuring Thickness of Different types of materials is Working on the principle of Ultrasonic Wave Propagation

2708, 2020

Positive Material Identification(PMI)

Positive Material Identification (PMI) is a fast and non-destructive method for verifying the chemical composition of metals and alloys. Portable and cost-effective, PMI can be performed in one of our state-of-the-art labs, or in the field. Positive material identification is a cost-effective method for confirming general material types. While not as thorough as other chemical analysis methods, PMI is a great option for confirming the alloy or type of large batches of material, testing finished components, re-certifying materials, and evaluating materials that cannot be destroyed, or shipped to a lab.

3108, 2020

LEVEL III SERVICES

(1) Program for training and qualifying NDE personnel with respect of internal procedure. (2) Review Master list of NDE personnel. (3) Visit test record for NDE personnel. (4) verify NDE personnel qualification records. (5) Check master list of NDE equipments & their calibration certificates. (6) Check Batch Certificate & Expiry Date of Consumables

Join Over 5000 Students Register Now For The Trainings With Us

Become Part of Arihant NDT Services to Further Your Career.

    Get a Quote